Energy Exchange

EDF Energy Innovation Series Feature #18: Gas Leak Detection From Picarro

EDF’s Energy Innovation Series highlights innovations across a broad range of energy categories, including smart grid and renewable energy technologies, energy efficiency financing and progressive utilities, to name a few. This Series helps illustrate that cost-effective, clean energy solutions are available now and imperative to lowering our dependence on fossil fuels.

For more information on this featured innovation, please view this video on Picarro’s innovation.

With the surge in shale gas discovery and development, natural gas, which is approximately 90% methane, is a growing part of our nation’s energy mix. There are now more than 40,000 shale gas wells in operation in the U.S. today – three times as many as in 2005.

Despite its great promise though, current production practices all too often impose unacceptable impacts on air, water and landscapes. Methane leakage is a key area of concern, as leaks during the production, distribution and use of natural gas have the potential to undermine and possibly even reverse the greenhouse gas advantage that natural gas has over coal or oil. This is because methane is a remarkably powerful greenhouse gas and its effect on the climate is 72-times more potent than that of carbon dioxide over a 20-year time frame. Estimates of fugitive emissions range from 1.5 to 9.0%; the truth of the matter is that no one knows for sure.

Enter Picarro SurveyorTM from the Silicon Valley start-up Picarro, which makes devices and software that detect, measure and analyze a range of gasses from acetylene and CO2 to ammonia and formaldehyde. This high-tech solution, which integrates a mobile methane gas analyzer with cloud-based, geo-informatics software, is currently in use by companies like PG&E (not to mention EDF’s own scientists).

“When it comes to safety and environmental impact, we know that fugitive natural gas leaks are an important factor, which gas companies must manage carefully,” said Michael Woelk, CEO of Picarro. “Our technology is making that process easier by modernizing the way these companies detect leaks along their pipelines. The result is better public safety and a healthier environment.”

Source: Picarro

About the size of a suitcase, Picarro Surveyor can be installed in the trunk of a car. Additional sensors installed on the car’s roof capture wind speed and direction to determine the source of even the most trace amounts of gas. The technology also distinguishes natural gas leaks from other sources of methane, such as landfills, sewers or livestock. The results are matched with GPS data via Picarro’s cloud-based data processing platform, P-Cubed®, and reporting is available online to anyone with a web-enabled device and secure connection.  This allows personnel to investigate gas sources and coordinate necessary responses to repair the leaks. This real-time, networked detection system replaces the incumbent process of monitoring natural gas pipeline leaks by workers on foot patrolling areas with hand-held detectors and manually logging their results.

PG&E is currently deploying multiple Picarro Surveyors and is optimistic about its results.  “This gas detection technology is revolutionary,” PG&E’s EVP of Gas Operations Nick Stavropoulos noted in a PG&E video. “It is going to change the way all gas companies across the world try to find and detect leaks. It is so much more precise, so much more real-time, in terms of the information it provides us.”

Picarro also layers current wind and weather data on Google Maps and satellite images, providing visual simulations that help pinpoint potential sources and predict possible affected areas.

Natural gas can have significant climate benefits over coal and oil. But only if leaks are adequately detected and quickly reduced.  New emissions detection technology, like Picarro Surveyor, make it possible for industry to implement more effective methane leak detection and repair programs today, and enables regulators to establish emission limits and detection practices that mitigate methane pollution.

Posted in Energy Innovation, Methane, Natural Gas / Tagged | Comments are closed

Energy Crunch: Saving Energy In Texas Schools Is A Win-Win

This commentary was originally posted on EDF’s Texas Clean Air Matters blog.

The Texas Legislature is back in session, and there will be, as always, a lot of discussion about how to fund schools. The school system in our state seems to be chronically short of funds to meet the demands of our growing state and its children.

But while the state-level politicians discuss, some school districts are taking matters into their own hands where they can. In the summer 2012, the Houston Independent School District (HISD), the seventh largest school district in the U.S. and the state’s largest, hosted a student through the EDF Climate Corps program. The program trains graduate students to find energy savings in their host institutions or companies. The Climate Corps fellow at HISD found several potential projects to help save the district money. For example, HISD has approximately 1,000 temporary buildings. The fellow found that if all the trailer-type temporary buildings’ lighting and wall air conditioning units and box heaters were upgraded and had insulation installed, at an upfront cost of $453,000, the district would realize over $62,000 in annual savings, nearly 700 kilowatt hours in annual electricity savings, and an annual reduction of approximately 400 metric tons of carbon dioxide. And that’s just one project!

The student’s work built on the findings of an audit funded through the State Energy Conservation Office (SECO) in 2007, which estimated that with recommended upgrades, HISD could cut its annual energy costs by $15 million!

Since the 2007 audit was performed, Houston voters have approved two bonds to help upgrade their school district, including one in November 2012. In the last bond vote, they approved, by a margin of nearly 2:1, a $1.89 billion bond to replace and repair 40 schools in HISD. In recent years, HISD has committed to ensuring all new and future buildings meet Leadership in Energy and Environment Design (LEED) standards for green building.

In 2009, the Texas Legislature passed Senate Bill 300, which was signed by Governor Perry. It requires school districts to develop long-term energy plans. It leaves it up to the boards of trustees of the individual school districts to determine if they want to submit the plan to SECO to help finance measures for plan compliance. There is no way to determine which school districts have developed plans or are implementing them. This Legislature could require school districts to report to SECO or could establish some minimum standards for building new school facilities or renovating existing ones.

Nationwide, schools spend more than $6 billion on energy costs, and the US Department of Energy National Renewable Energy Lab estimates that most schools could save about 25 percent of that by implementing smart energy measures. Those savings could pay 40 million new textbooks, 30,000 new teachers or 1.5 million new computers every year.

Some relatively simple measures such as daylighting (using windows and skylights to bring in natural light) have a double benefit—in addition to saving the average middle school tens of thousands of dollars in energy costs, daylighting technologies are also proven to improve students’ academic performance. One study in North Carolina showed that students who attended daylight schools scored up to 14 percent better on tests than the equivalent non- daylight school students. Smarter energy technologies and conservation measures lead to lower electricity costs, but also to lower maintenance costs, better indoor air quality, and free up money that can be used on other necessities, such as hiring teachers or buying more computers.

There is often an upfront cost to installing these energy efficiency technologies (although many conservation measures, such as turning off vending machine lights require no cost and only save money), but in most cases, school districts are in a good position to take advantage of several financing options. SECO operates the LoanSTAR program, which uses a revolving loan mechanism to fund energy efficiency projects for public buildings, including those in school districts. SECO also operates the Texas Cool Schools grant program, which helps Texas schools lower their operating costs by purchasing new and more energy-efficient heating, ventilation and air conditioning (HVAC) systems.

Performance contracting is another way to finance upfront costs for schools. Under performance contracts, contractors pay the upfront costs, which are recouped through a portion of the resulting savings, and even guarantee net savings for the building owner.

As we start this new Legislative Session in Texas, and parallel debates happen about our impending energy crunch and how to fund schools, doesn’t it make sense to merge these two issues? Help our school districts reduce energy costs (and in the process improve indoor air quality, student performance, and water efficiency) and enable them to spend their money on improving education, and reduce stress on the grid. Don’t the schoolchildren of Texas deserve that?

Posted in Energy Efficiency, Texas / Comments are closed

Dallas Fort-Worth Breathes Easier Following EPA’s Decision On Wise County Ozone Petitions

This commentary was originally posted on EDF’s Texas Clean Air Matters blog.

Just in time for the holidays, the U.S. Environmental Protection Agency (EPA) delivered a valuable gift to residents of the Dallas-Fort Worth area: the promise of stronger protections against the harmful public health and environmental impacts of ground-level ozone (the main component of smog). Specifically, EPA announced on January 7 that it has decided to deny 19 petitions filed by the state of Texas and other parties last summer — all demanding that the agency reverse its determination that Wise County, Texas contributes to high ozone levels in nearby Dallas-Fort Worth (EPA’s responses were signed December 14, 2012). EPA’s action means that polluters in Wise County will have to do their fair share to reduce ozone levels in Dallas-Fort Worth, which have been among the worst in the country for many years. Because of the importance of this issue to the public health of Texans, EDF has already taken steps to defend EPA’s action in Federal court.

Background

Ozone pollution has long been regulated under the Clean Air Act because of the tremendous hazards that ozone poses to public health and the environment. High ozone levels lead to respiratory distress and disorders; decreased lung function; increases in emergency room visits and sick days; and more. To address the serious problem of ozone, the Clean Air Act provides a multi-step process for ensuring that all areas of the country achieve acceptable ozone levels. First, EPA must establish nationwide air quality standards for ozone (called National Ambient Air Quality Standards), which are required to be strong enough to protect public health with an adequate margin of safety. Second, EPA must designate which areas of the country meet those standards, and which do not. Lastly, states are required to submit plans for achieving and maintaining compliance with EPA’s ozone standards — with especially strict requirements for areas that currently do not meet the standards.

EPA last updated its ozone air quality standards in March 2008. The revised standard requires that average ozone concentrations over an 8-hour period remain at or below 75 parts per billion (ppb) — a level that is more protective than the previous standard set in 1997, but still significantly higher than the range of 60 to 70 ppb recommended by EPA’s own Scientific Advisory Committee. EDF has consistently advocated for a stronger ozone standard, and has even taken EPA to court over this issue together with other public health and environmental organizations. At the same time, EDF has also fought hard against attempts to weaken the 2008 ozone standards or stop their implementation.

Designation of Wise County

On May 21, 2012, EPA issued a regulation designating 45 areas of the country as out of compliance with the 2008 ozone standards – including a group of ten counties in the Dallas-Fort Worth area, which had long failed to meet the earlier and less stringent ozone standards. For the first time, however, the Dallas-Fort Worth designation also included Wise County, Texas, due in large part to emissions of nitrogen oxides and volatile organic compounds from a recent boom in oil and gas production in the area.

As EPA explained in a detailed technical analysis, Wise County was included in the Dallas-Fort Worth ozone designation because of the county’s contribution to unhealthy levels of ozone. Among other things, EPA found that ozone monitors less than half a mile from the county line were recording unhealthy levels of ozone; that Wise County emits some of the highest levels of ozone-forming pollution in the 19-county area surrounding Dallas-Fort Worth; and that the prevailing winds on high-ozone days are responsible for bringing that pollution from Wise County to the nearby city.

Ensuing Litigation and Requests for Reconsideration

EPA’s determination was reached after a lengthy process during which the state of Texas and other stakeholders had ample opportunity to submit comments and data on Wise County’s contribution to ozone in Dallas-Fort Worth. However, this didn’t stop the state, some local governments, and various oil and gas producers and trade associations from trying to stop the designation of Wise County by filing a total of 19 petitions asking EPA to reverse its decision. The state of Texas, Wise County, and four industry parties also filed legal challenges to EPA’s determination in the D.C. Circuit Court of Appeals — and EDF responded by moving to intervene in defense of EPA’s action.

EPA’s Denial of Reconsideration and Next Steps

In detailed responses to the petitions, EPA reaffirmed its analysis of Wise County’s contribution to the local ozone crisis and offered rebuttals to each of the major arguments advanced by the petitioners. EPA’s responses confirm that the designation of Wise County rests on the best available science. EPA’s action is also an important advance for public health — ensuring that polluters in Wise County will do their fair share to address ozone pollution in the Dallas-Fort Worth area, and that the important protections of the Clean Air Act extend to ozone-contributing areas and sources that have been overlooked in the past.

We hope that the parties challenging the Wise County designation will ultimately decide to demonstrate leadership by becoming part of the solution to the air quality challenges facing Dallas-Fort Worth. In the meantime, vital work remains to be done to defend EPA’s actions in court: the ongoing D.C. Circuit challenges to the original designation of Wise County, which were suspended while EPA processed the reconsideration petitions, are likely to resume in a matter of weeks. In addition, EPA’s decisions on the petitions may provide fresh fodder for additional legal challenges in the D.C. Circuit. EDF’s legal team stands ready to vigorously defend EPA’s decision in the months ahead.

Posted in Natural Gas, Texas / Comments are closed

EDF’s Investor Confidence Project Helps Achieve The Potential Of Energy Efficiency

This blog post was written by guest blogger Matt Golden, Senior Energy Finance Consultant.

The EDF Investor Confidence Project (ICP) has been a two-year process to help standardize the commercial energy efficiency industry. Working with a wide range of project advisors, the first set of protocols designed for large commercial building projects are now available for a public beta on our website www.EEperformance.org. The goal is to simplify the process of creating an investment-quality energy efficiency project, reducing engineering-related transaction costs and increasing deal flow and savings.

We believe that the Investor Confidence Project represents a “silver buckshot” that, when combined with other efforts underway such as On-bill repayment (OBR), Commercial PACE and benchmarking programs, can help deliver a sustainable, private capital-driven market.  This will help spur economic development in these challenging times and achieve the potential of energy efficiency as a clean and cost-effective climate and energy policy.

While there are many technical standards regarding how to engineer various aspects of a project, we currently lack a meta layer that creates standardization at the project level. Ultimately, a project’s performance is only as good as the sum of its parts. The ICP protocols are combinations of the existing technical standards in the market, offering clear definitions for how a project is engineered, documented and ultimately measured. In the short-run, this can greatly accelerate channels and increase volume, and, over the long-term, can lead to increased access to lower-cost capital.

The Investor Confidence Project is happy to announce (and thank) our new ICP Allies, who have committed to piloting the ICP protocols in 2013. SciEnergy, Energi, Sustainable Real Estate Solutions, Bright Power, The Association for Energy Affordability, kWhOURS, Inc., Performance Systems Development, Clean Energy Finance and Investment Authority, Rocky Mountain Institute, Institute for Market Transformation, The Centre for Building Performance and the Building Energy Retrofit Institute are moving towards adopting the ICP Energy Efficiency Performance Protocol for Large Commercial Projects as their preferred method for estimating, measuring and reporting savings for large commercial projects.

We have been experiencing a ground swell of support coming from both public programs and market players, who have been instrumental in helping us identify this critical need and develop a set of protocols that balance engineering best practices with market-based realities. While ICP initially focused on financial investors as the key customers, we are now seeing a wide variety of users, including utilities, public programs, insurers and energy service companies, in addition to equity and debt investors and of course building owners.

As we roll-out this initiative in 2013 and achieve critical mass, our focus is now on gaining real-world feedback. We are also embarking on developing two additional protocols tailored to multi-family building retrofits and smaller commercial projects. If you are interested in learning more, or getting involved, please let us know by visiting the ICP website for more details about the project and our Large Commercial protocol.

Posted in Energy Efficiency, Investor Confidence Project / Comments are closed

NERC Demands Action From ERCOT To Keep The Lights On In Texas

This commentary was originally posted on EDF’s Texas Clean Air Matters blog.

Last week was a busy one in Texas, with the beginning of the 83rd Legislative session attention was focused on incoming lawmakers, both seasoned and freshmen, and the opportunity that only happens every two years to address serious issues in Texas including water scarcity, education, tax issues, and of course energy issues.

So it’s understandable that no one seems to have noticed a strongly worded letter to the Electric Reliability Council of Texas (ERCOT) from the North American Electric Reliability Corporation (NERC) last Monday demanding more action to ensure electric reliability in Texas, and asking ERCOT to report back to NERC by April 30 on additional actions taken. NERC isn’t some federal boogey man either; it’s a corporation founded by the electric industry to create commonly accepted standards for electric reliability across North America, usually through voluntary compliance. President Bush’s Energy Policy Act of 2005 gave the corporation “the authority to create and enforce compliance with Reliability Standards,” which is where this letter comes into play.

In their 2012 report, NERC highlighted ERCOT as the only region in North America that was not maintaining adequate electric reserves to meet demand, and with this letter they made it very clear that the actions taken to date have not done enough to mitigate that risk. In the letter, NERC President Gerry Cauley notes that the PUC and ERCOT are continuing to address energy reliability issues, but finds that “solutions have not yet sufficiently materialized to address NERC’s reserve margin concern.”

Cauley goes on to say that “it is still unclear to us how ERCOT intends to mitigate issues that may arise on the current trajectory and when new resources may be available to meet growing demand.” So according to the corporation whose membership consists mostly of utilities, grid operators, large and small customers, and electric regulators, the actions that the PUC and ERCOT have taken at this point are not enough to ensure we’ll have reliable electric supply, risking blackouts as soon as this summer.

As lawmakers settle into Austin for the next few months they’ll certainly be paying close attention to this issue, though many have indicated they would prefer that ERCOT and the PUC develop the solutions to this problem. Cauley’s letter serves as notice that the PUC and ERCOT need to be more aggressive if they want to ensure a reliable supply of power in Texas. Certainly both agencies are putting serious time and effort into keeping the lights on in Texas, including effort so expand existing demand response programs, but NERC clearly thinks they need to be doing more.

All of this reminds me of the Texas drought: a year ago it was a huge looming crises, but a break in the weather took everyone’s mind off of the drying rivers and lakes, even though they never really recovered. Lately the drought has been back in the news as Texans realize that we’re basically in the same place that we were in 2011.

No one could accuse ERCOT or the PUC of sitting idly by or pretending this risk isn’t real. However, they have yet to send a strong enough signal to the market to spur investors in demand response or any other resources to develop new projects. About the only thing that has been done is the extension of the federal production tax credit for wind energy, which has wind developers racing to build new projects in Texas. The concern is that the solutions they’ve begun work on to date may not get us to where we need to be by this summer.

This letter is a reminder that the energy crunch hasn’t gone away, things are not likely to change in the near term if serious action isn’t taken soon. That is a risk we can’t afford to take given a looming drought, a growing economy and a stagnant electric market. NERC has asked ERCOT to report to them on their progress by April 30, near the end of our biennial legislative session, and one in which the critical PUC/ERCOT sunset legislation is expected to pass, maybe legislators should consider a similar request.

Posted in Demand Response, Energy Efficiency, Texas / Tagged , | Comments are closed

Weathering The Storm Next Time: Gov. Cuomo’s NYS 2100 Panel Offers Smart Plan To Keep The Lights On, Emissions Down

Extreme weather and aging infrastructure came together with a vengeance in Sandy, showing the fragility of the basic systems that sustain this vibrant city and region. Like so many others, my family lost power, heat and water during Superstorm Sandy, and I watched out my window as a giant flash marked the moment that waters crested a 12-foot retaining wall at the 14th Street ConEd plant.

New Yorkers are all too familiar with the devastation that followed, and the disruption that spread far beyond the water’s reach. As the immediate crises are resolved, our attention is now on the complex challenge of long-term resilience.

One big step: The NYS 2100 Commission, a panel of experts assembled by New York Gov. Andrew Cuomo back in November, just two weeks after the storm. EDF President Fred Krupp served on the commission, and our energy team prepared extensive recommendations on how to make our energy system more robust, resilient and adaptable. In yesterday’s State of the State address, he talked about the results.

As it turns out, some important solutions were right under our noses.

For example, amid the darkness and devastation, there were dozens of homes, businesses, even whole communities that kept their lights on and the water because they were designed to isolate breakdowns, heal quicker, and work with natural systems rather than against them.

Success stories were located across our region: 

  • Lights stayed on for sixty thousand residents of Co-op City in the Bronx thanks to a combined heat and power plant that can operate independent of the grid. Ditto the office tower at One Penn Plaza, an apartment building at 11 Fifth Avenue, and large parts of the campuses at Princeton and NYU. 
  • In Bayonne, NJ, the Midtown Community School used a combination of solar panels and a generator to offer a safe, warm place to stay for over 50 residents during the storm. 
  • On Long Island, the Villani family kept their lights on thanks to a 4.8 kw solar array that happens to have a battery bank. “We had friends and neighbors coming over to charge phones and batteries,” Stephanie Villani said. 
  • In lower Manhattan, the community group Solar one used solar panels to offer residents of Stuyvesant Town, the sprawling 35-building apartment complex, a place to charge their phones and computers.

Exceptions like these should be the rule next time. Unfortunately, today’s utility grid is set up to discourage more of these success stories – which are also cleaner and more efficient.

Source: Reuters

In fact, many buildings outfitted with fresh new solar arrays stayed dark thanks to cumbersome, outdated rules and regulations. Ironically, the solar panels were not making electricity when the grid was down, precisely because they were permanently connected to the grid and had to be shut down, rather than simply unhook when the larger system failed. So instead of sunshine, they were running on diesel power – if they were running at all.

Building a smarter grid, and encouraging clean, efficient ‘microgrids’ that provide islands of heat and light means fewer outages and faster recovery. A smarter grid would also have the intelligence needed to pinpoint outages, cordon off damage, and reroute power.

Clearing out the legal cobwebs and requiring utilities to unlock their grids more easily would make their systems stronger and more resilient in a crisis, and open the door for more efficient, renewable energy solutions. It would also open up opportunities for new ways to finance the upgrades needed to take full advantage of efficiency and renewables in today’s buildings.

(You can read EDF’s blueprint for a smarter, more robust grid here.)

Climate change means that higher sea levels and more extreme storms are the new normal. Unfortunately, some of this is already locked in. But we still have an opportunity to prevent the worst, most costly consequences by working together to reduce heat-trapping pollution. Superstorm Sandy reminded us of the need to prepare for a more challenging future. We need to make sure the steps not only protect against the impacts we can’t avoid, but also help prevent those we can.

Yes, we will have to fortify our buildings and infrastructure, change building codes and keep generators on hand in the face of extreme weather. But a lot of the steps we can take to keep the lights on during a crisis are also steps we can take to cut the pollution that is linked to climate change and extreme weather in the first place.

As we invest federal emergency dollars to rebuild, as we get ready for the next time – let’s make sure we’re taking every step that solves for both safety and less pollution at the same time. Efficiency, a smart grid, transparent information, renewables. Unlocking multiple benefits like these can help us rebuild better, faster and stronger. And lead the way for the world’s great cities, many of which are on the coast and in harm’s way just like New York.

My kids and I were lucky to weather the storm with just inconvenience. But as I think about how might live in a future New York City, I’d like to be sure that we’re doing everything we can now to run this town on safe, clean energy. The Cuomo commission report takes a big step in that direction: let’s join the Governor and the members of this commission in making its recommendations a reality. This is an opportunity that business, political and community leaders must not miss.

Posted in Demand Response, Energy Efficiency, Grid Modernization, New York, Renewable Energy / Tagged , | Read 1 Response