Monthly Archives: April 2015

Electric Reliability and the Clean Power Plan: Perspectives of a Former Regulator

By / Bio / Published: April 21, 2015
1024px-Wind_Turbines_and_Power_Lines,_East_Sussex,_England_-_April_2009

Source: Wikimedia Commons

There is no great disagreement that the U.S. energy system is transforming. With or without additional environmental regulations, like the U.S. Environmental Protection Agency’s (EPA) proposed Clean Power Plan, this transition is occurring. Our history and experience have demonstrated that we can weather it without threatening our uniform and non-negotiable commitment to reliability.

But to do that, we need to tap all of the tools at our disposal to ensure a robust, reliable, and integrated energy system that is no longer dependent exclusively upon centralized, fossil fuel generation. Done right, the resulting change can deliver benefits to customers, the economy, the environment, electric companies, innovators, and workers alike.

EPA’s proposed Clean Power Plan would place national limits on carbon pollution from existing fossil fuel power plants for the first time ever. In doing so, it would create long-term market signals that will help drive investments in energy efficiency, demand response, and renewable energy for years to come – not only reducing carbon pollution from the power sector to 30 percent below 2005 levels by 2030, but also by putting us on a path to a more reliable and resilient energy system.

As a former Commissioner of the Ohio Public Utilities Commission and electric system operator, I understand preserving the reliability of electric service is a paramount public responsibility for energy and environmental regulators, and for the power companies they oversee. As a Commissioner, I served as vice chair of the Critical Infrastructure Committee, a member of the Electricity Committee, and on the Task Force for Environmental Regulation and Generation within the National Association of Regulatory Utility Commissioners (NARUC). I co-chaired the National Electricity Forum 2012 to modernize the nation’s electricity infrastructure. At the request of the Federal Energy Regulatory Commission (FERC) and the U.S. Senate Committee on Energy and Natural Resources, I have provided testimony on reliability of the bulk power system before both of those bodies.

Prior to my appointment to the Commission, I served for six years as the Deputy Director and then Director of the City of Columbus, Ohio Department of Public Utilities. My duties there included running the City’s electric distribution utility. This hands-on experience meeting the daily needs of electricity customers as both a regulator and a system operator – while protecting the financial integrity of the system – gives me a keen appreciation for the real-world demands and importance of system reliability.

From that perspective, perhaps the most critical feature of the proposed Clean Power Plan is the flexibility it provides to states and power companies to craft individualized compliance plans that reduce pollution while preserving and strengthening electric reliability. EPA’s approach gives clear guidance on what limits and metrics must be met, but leaves states the flexibility to design solutions that will boost the economy and meet those requirements as they see fit.

That flexibility acts as a built-in “safety valve,” affording each state multiple pathways for compliance and providing leeway for states to make plans that are appropriate to their unique circumstances. Moreover, this flexibility complements the robust framework of operating practices, market instruments, and planning processes that already exist to address short-term and long-term reliability issues.

Leading experts on energy policy and electric reliability have recently weighed in to confirm reducing carbon pollution goes hand in hand with electric reliability, thanks to the flexible structure of the Clean Power Plan and our existing reliability tools and processes. According to a recent report by The Brattle Group, the combination of the ongoing transformation of the power sector, the steps already taken by system operators, the large and expanding set of technological and operational tools available, and the flexibility under the Clean Power Plan are likely sufficient to ensure compliance will not come at the cost of reliability.

And, just last week, Dr. Susan Tierney – a former Assistant Secretary for Policy at the U.S. Department of Energy and former Commissioner of the Massachusetts Department of Public Utilities— joined two other energy policy experts in sending a letter and report to the Chairman of the Federal Energy Regulatory Commission (FERC) concluding:

Evidence does not support the argument that the proposed CPP will result in a general and unavoidable decline in reliability.

The report provides examples of recent instances in which grid operators, FERC, and other entities have effectively used existing processes and tools to deftly address other kinds of reliability challenges in recent years, some of which were significant and unanticipated.

In 45 years of implementing the Clean Air Act, clean air standards have never caused the lights to go out. And nothing about the proposed Clean Power Plan – with all of its tremendous flexibility – will alter that record.

That’s a remarkable testament to the institutions and processes that exist to protect reliability, as well as the careful process EPA uses in developing clean air standards – and it is great news for families and communities who want and deserve clean air in addition to reliable, affordable electricity. The Clean Power Plan, like our other vital clean air standards, will help deliver both.

Posted in Clean Air Act, Clean Power Plan, Energy, Policy, Setting the Facts Straight / Read 1 Response

Experts Agree: We Can Preserve Electric Reliability While Protecting Public Health Under the Clean Power Plan

By / Bio / Twitter profile / Published: April 16, 2015

power-poles-503935_1920Last June, the Environmental Protection Agency (EPA) proposed the first ever national carbon pollution standards for existing power plants. Fossil fuel-fired power plants account for almost 40% of U.S. carbon dioxide emissions, making them the largest source of greenhouse gas emissions in the nation and one of the single largest categories of greenhouse gas sources in the world.

Under the Clean Power Plan, these emissions will decline to 30% below 2005 levels by 2030 – accompanied by a significant decline in other harmful pollutants from the power sector, such as sulfur dioxide and oxides of nitrogen. The power sector is already halfway to this target, already 15% below 2005 levels.

The EPA has carefully designed the Clean Power Plan to provide extensive flexibility so that states and power companies can continue to deliver a steady flow of electricity while deploying cost-effective measures to reduce carbon pollution over the next fifteen years.

The Clean Power Plan:

  • Allows states and power companies to determine the optimal timing of emission reductions over a ten year-long averaging period starting in 2020;
  • Allows states to decide how to most cost-effectively reduce carbon pollution, including through market-based programs and clean energy policies that have been successfully used around the country; and
  • Allows states to cooperate with one another in complying with the long-term reduction goals.

In addition, the Clean Power Plan preserves the ability of grid operators to deploy long-standing tools and processes that have been successfully used in the past to keep the electric grid functioning reliability during periods of significant change. EDF has released a white paper identifying these well-established tools and practices, and describing how they will continue to ensure a reliable grid under the Clean Power Plan.

Grid operators are well-equipped to ensure reliability as we transition to a cleaner and more efficient power sector, just as they have under all previous Clean Air Act regulations. EPA’s proposed Clean Power Plan is eminently achievable, reliable, and cost-effective – and integral to our climate security, human health and prosperity.

Ample tools and practices exist to ensure a clean and reliable grid

Grid operators have long-standing tools and practices available to ensure that our nation’s grid continues to provide power reliably. These include well-established planning principles that have motivated large amounts of new generation year in, year out. Since 2000, roughly 30 gigawatts of new generation have been added per year, largely consisting of low or zero-emitting resources such as wind turbines and natural gas combined cycle power plants. Over the next two years, the solar industry alone expects to add another 20 gigawatts of power. In addition, reliability is ensured through tools and practices including:

  • Transmission Upgrades: Because upgraded transmission infrastructure can help move generation more easily, transmission upgrades can enhance reliability without needing to add new generation.
  • Long-term forecasting: Grid planners and reliability regulators forecast the needs of the electric grid years in advance. By determining how much transmission and generation will be needed, any long-term reliability issue can be identified and resolved quickly and effectively.
  • Reliability Must-Run (“RMR”) Contracts: Short term contracts that, in the case of sudden and unexpected retirements or plant losses, require a unit to be kept operational until reliability can be ensured through the use of longer term tools.
  • Operating Procedures: Manuals and standard practices exist to ensure that, in the case of particular reliability scenarios, grid operators know the best way to respond.

These tools are already in use throughout the country, and have proven extremely effective in maintaining reliability over the last few decades – even as the power sector has begun a rapid transition towards cleaner sources of electricity, and has implemented important public health protections under the Clean Air Act. In the Mid-Atlantic region, for example, roughly 12,500 MW of coal-fired power plant capacity retired from 2010 to 2014 due to economic reasons. Employing these well-established tools and practices, the region saw a large quantity of new resources added, without reducing reliability.

Clean energy resources and reliability

In complying with the Clean Power Plan, states and power companies will be able to draw on reliable, low-cost clean energy resources like demand response, renewable energy, and energy efficiency. Energy efficiency is almost three times cheaper than the next cheapest alternative and primed for enormous growth. Resources like demand response help prevent blackouts, such as in the case of the 2013 polar vortex. And renewable energy continues to grow, with states such as Maine, California, and Iowa already using it to meet close to one quarter of their entire demand.

No reliability crisis has resulted from implementing clean air standards

Claims that we can’t have clean air and a reliable power grid are as old as the Clean Air Act itself — and have never proven accurate. As far back as the 1970s, a power company issued an ad claiming the lights would go out as a result of the Clean Air Act. In recent years, some power companies that oppose public health protections under the Clean Air Act have made similar claims that the Mercury and Air Toxics Standards and Cross-State Air Pollution Rule will harm electric reliability.

These assertions have consistently been discredited: in the 45-year history of the Clean Air Act, no emission standard has ever caused the lights to go out. This is a testament both to the rigorous process and analyses EPA relies on to develop Clean Air Act standards, as well as the effective tools that grid operators and other authorities use to manage reliability on a short-term and long-term basis.

Numerous states, power companies, and reliability experts have indicated that the Clean Power Plan is achievable

A diverse collection of energy experts and power company officials have recently made comments noting the feasibility of achieving the emission reduction goals of the Clean Power Plan; describing their experience in reducing carbon emissions in a cost-effective way as well as explaining approaches to ensure reliability is maintained while making progress to reduce carbon emissions.

Written Testimony of Kathleen Barrón, Senior Vice President, Exelon Corporation, Before the Federal Energy Regulatory Commission: Technical Conference on EPA’s Clean Power Plan (Feb. 19, 2015):

Exelon strongly supports EPA’s goal of reducing carbon emissions from the electric power sector. As EPA notes in the Clean Power Plan, the current level of carbon emissions is environmentally unsustainable, and action must be taken now in order to prevent significant, irreversible environmental damage and major economic loss. By providing regulatory certainty, well-designed carbon reduction rules will be a driving force to modernize our aging electric system so that our customers will continue to have a safe and reliable electric system to support our Nation’s economic growth.”

Written Testimony of Susan F. Tierney, Ph.D, Analysis Group, Before the House Comm. on Energy and Commerce: Hearing to Examine EPA’s Proposed 111(d) Rule for Existing Power Plants (Apr. 14, 2015):

The Clean Power Plan provides states a wide range of compliance options and operational discretion that can prevent reliability issues while also reducing carbon pollution and compliance costs. Experience has shown that such approaches allow for seamless, reliable implementation of emissions-reduction targets. By contrast, many stakeholders’ concerns about the Clean Power Plan presume inflexible implementation, are based on worst-case scenarios, and assume that policy makers, regulators, and market participants will stand on the sidelines until it is too late to act. There is no historical basis for these assumptions.”

Joshua Epel, Chairman, Colorado Public Utilities Commission, Before the Federal Energy Regulatory Commission: Western Regional Technical Conference on EPA’s Clean Power Plan (Feb. 25, 2015).

In Colorado we have charted our own course to decarbonize our electric system. . . . Now when the Clean Power Plan is finalized I believe that Colorado as a state will come up with an approach which will meet the revised goals . . . . I’m very pleased with some of the steps we have taken with just approved unprecedented amounts of utility scale solar . . . . We are doing a lot with wind, we are doing a lot with innovat[ive] approaches actually passed by the legislature. . . . So we think there’s a lot of innovative tools for Colorado to use.”

Flexibility in the Clean Power Plan

EPA’s Clean Power Plan wholly preserves the ability of grid operators, power companies, and other institutions to deploy the well-established tools and practices that ensure the reliable operation of the power grid.

The Plan provides state-wide goals for emission reductions, while affording states ample flexibility in how those goals must be met. States are not limited to using any particular pathway to meet the Plan, and can deploy a variety of existing and new policies to meet the state-wide greenhouse gas reduction goals, including flexible market-based tools. This already existing flexibility allows grid operators the freedom to use long-standing and tested actions to ensure reliability.

Although the Clean Power Plan represents an important step forward for our country, it builds on a nation-wide trend toward a cleaner and more efficient power sector that is already under way. As noted above, carbon emissions from the power sector are already 15% lower than in 2005 – reflecting a sharp decline in coal-fired power generation, as well as a significant increase in natural gas generation and renewables and rising investment in energy efficiency.

Since 2005, many fossil fuel-fired power plants have also installed modern pollution controls in response to state and federal clean air standards adopted to protect public health from harmful particulates, ozone-forming pollution, and toxic air pollutants such as mercury and arsenic.

The robust system of reliability safeguards described above has responded deftly to these developments, ensuring a consistent and reliable supply of affordable power while helping reduce harmful air pollution. There is every reason to believe that the Clean Power Plan, with its extended implementation timeframe and numerous compliance flexibilities, will similarly achieve important reductions in air pollution without compromising electric reliability.

For more information please read our white paper: Protective Carbon Pollution Standards and Electric Reliability

Posted in Clean Air Act, Clean Power Plan, Energy, Greenhouse Gas Emissions, News / Read 2 Responses

Clean Power Plan Litigation: An End Run around the Clean Air Act and the Democratic Process

By / Bio / Published: April 13, 2015

This Thursday, April 16, a three-judge panel of the United States Court of Appeals for the D.C. Circuit will hear oral argument in three related cases — West Virginia v. EPA (No. 14-1146) and In re Murray Energy Corporation (No. 14-1112, 14-1151) — involving challenges to EPA’s proposed Clean Power Plan, which will establish the nation’s first limits on carbon pollution from existing fossil fuel-fired power plants.

EDF is a party to the cases, and will be in court on Thursday.

These cases have attracted media attention in large part because these are the first legal challenges to a high-profile national rulemaking that will establish critical public health protections for the nation’s largest source of greenhouse gases.

But these cases are also drawing notice because they involve highly unorthodox attempts to stop an ongoing rulemaking process. EPA is still considering more than four million public comments received between June and December 2014 on its proposed standards, and the Agency is not expected to issue a final rule until this summer.

From a legal perspective, the petitioners’ case is fatally flawed on both procedural and substantive grounds.

Turning first to the procedural issues:

The timing of these legal challenges blatantly disregards the most basic principles of federal administrative law.

Although the three petitions before the D.C. Circuit have different procedural postures, all of them seek to block or overturn EPA’s proposed carbon pollution standards. But under federal administrative law, standards developed by agencies such as EPA must go through a transparent and participatory process in which proposed standards are published, the public has an opportunity to comment on those standards, and agencies then issue final standards that respond to those comments. Both the Clean Air Act and the Administrative Procedure Act clearly provide that legal challenges can only be filed after this process is complete, and the agency has taken final action.

This long-standing rule against premature legal challenges serves a number of compelling purposes:

  • It prevents parties from doing an “end run” around the public comment process.
  • It gives administrative agencies the opportunity to ensure that final rules are firmly grounded in law and fact.
  • It ensures that reviewing courts have before them the agency’s full and definitive decisions and analyses.
  • It protects courts and agencies from wasting valuable time litigating proposals that may change as a result of public comments.

Those purposes clearly apply here. EPA is months away from taking final action on the Clean Power Plan — and is still weighing millions of public comments filed on almost every aspect of the proposed rule, including the same legal issues raised by the D.C. Circuit petitioners (who have simultaneously filed voluminous comments with EPA making the very arguments they are making in court).

The petitioners attempt to short-circuit this careful, deliberative rulemaking process is radical and would – if successful – open the door to endless litigation over agency proposals. Petitioners have pointed to no case in which the D.C. Circuit or any other federal court has ever entertained such an anticipatory challenge to an administrative rulemaking. Indeed, in the last two years, the federal courts have twice dismissed similar lawsuits that were filed against EPA’s proposed carbon pollution standards for new power plants — Las Brisas Energy Center LLC v. EPA, 12-1248 (D.C. Cir. Dec. 13, 2012) and Nebraska v. EPA, No. 4:14-CV-3006 (D. Neb. Oct. 6, 2014). On procedural grounds alone, the petitioners’ case should similarly be dismissed.

The petitioners’ substantive claim — that EPA is prohibited from regulating carbon dioxide from the power sector under section 111(d) of the Clean Air Act — is equally unfounded.

Section 111(d) of the Clean Air Act requires EPA to regulate harmful pollution from existing sources, where that pollution is not regulated under other provisions of the Clean Air Act relating to national ambient air quality standards (sections 108-110) and hazardous air pollutants (section 112). For more than forty years, section 111(d) has been understood to serve a vital gap-filling role in the Clean Air Act – ensuring the protection of human health and welfare from harmful air pollution that is not addressed under other key Clean Air Act programs.

Because carbon dioxide from the power sector is not regulated under section 108 or 112, EPA has logically proposed that it must be regulated under section 111(d). This conclusion not only follows from a long-standing interpretation of section 111(d), it also is consistent with the Supreme Court’s 2011 decision in American Electric Power v. Connecticut – which stated that section 111(d) “speaks directly” to the problem of carbon pollution from existing power plants, and held that EPA’s authority to regulate carbon pollution under section 111(d) displaces federal common law.

Indeed, attorneys for some of the nation’s largest power companies specifically supported this interpretation at oral argument before the Supreme Court, and urged the “comprehensive” coverage of the Clean Air Act, including section 111(d)’s applicability to carbon dioxide emissions from existing power plants, as a reason why federal courts should not recognize a non-statutory remedy for power plant carbon pollution under the federal common law.

The petitioners nonetheless contend that EPA is categorically forbidden from regulating carbon dioxide from the power sector under section 111(d) because EPA has already issued standards for different pollutants (mercury, other toxic metals, and acid gases) from the power sector under a different section of the Clean Air Act.

As EPA explained in its brief in West Virginia, this theory amounts to a “pick your poison” approach to the Clean Air Act – arbitrarily limiting EPA to regulating either pollutants like mercury under section 112 or pollutants like carbon dioxide under section 111(d) for any given source, but not both.

Such a result would be completely out of step with the Clean Air Act, which consistently recognizes that different air pollutants pose different risks to the public, so that controlling one pollutant from a source does not eliminate the need to control other pollutants. The petitioners’ theory would radically alter the structure of the Clean Air Act, transforming what is now a seamless regulatory framework into one with potential gaping loopholes.

Neither the text nor the structure and history of the Clean Air Act support these claims. The petitioners’ theory rests entirely on a strained interpretation of a technical amendment to section 111(d) that the House of Representatives passed as part of the 1990 Clean Air Act amendments. But as EPA and other parties describe in more detail in their briefs to the DC Circuit, the text of the House amendment has multiple interpretations – and is most reasonably read to support the traditional “gap-filling” role of section 111(d) and EPA’s authority to regulate carbon dioxide from the power sector.

Moreover, the petitioners call on the court to disregard a contemporaneous Senate amendment to section 111(d) that — as even they admit — unambiguously preserves EPA’s authority to regulate carbon pollution.

The Senate amendment, like its House counterpart, was passed by both houses of Congress and signed into law by the President. It is the law of the land and cannot simply be read out of the Clean Air Act.

The petitioners’ theory also represents bad statutory interpretation because it would dramatically change the structure of the Clean Air Act in a way that Congress could never have intended – making it difficult or even impossible for EPA to protect the public from harmful pollutants from the dozens of industrial source categories whose emissions of hazardous air pollutants are regulated under section 112. In all of the extensive debate, committee reports, and other legislative history that led up to the enactment of the 1990 Clean Air Act amendments, there is not a shred of evidence that Congress intended to create loopholes in section 111(d) as the petitioners claim.

Faced with this reality, the petitioners insist – without any supporting evidence — that Congress wanted to avoid “double regulation” of source categories under sections 111(d) and 112. But it is not “double regulation” for EPA to regulate different health-harming pollutants from the same source category under different provisions of the Clean Air Act. In fact, the Clean Air Act has always permitted and even required such regulation. Many facilities in the power sector, for example, are currently regulated under multiple Clean Air Act programs addressing different air pollution problems that are associated with a variety of adverse health effects.

Further, the 1990 amendments include a provision stating that standards under section 112 must not be “interpreted, construed or applied to diminish or replace” more stringent requirements under section 111. This is a strong indication that Congress intended for section 112 to work seamlessly with, not displace, section 111(d).

EPA’s proposed interpretation of section 111(d) also has a long and bipartisan history – further supporting the reasonableness of the agency’s view and underscoring the bizarre and opportunistic nature of the petitioners’ theories.

As documented in a compelling brief filed by NYU’s Institute for Policy Integrity, EPA has adopted the view that section 111(d) applies to any pollutant not regulated under section 112 or section 108 in multiple rulemakings since 1990 — not just in the Obama Administration, but also the George W. Bush Administration, the Clinton Administration, and the Administration of George H.W. Bush, who actually signed the 1990 amendments.

Ultimately, the petitioner’s flimsy substantive claims only underscore the wisdom of the procedural bar against premature challenges to agency proposed rules.

EPA undoubtedly possesses the authority to limit carbon pollution from existing power plants under section 111(d) of the Clean Air Act. That’s good news for the families and communities that are afflicted by mercury and carbon pollution from fossil fuel power plants — the nation’s single largest source of both health-harming contaminants.

Congress did not intend for our children to have to “pick their poisons,” but instead created a seamless framework – which Republican and Democratic administrations alike have long carried out — to safeguard our health and our children’s health from all harmful air pollution.

Posted in Clean Air Act, Clean Power Plan, EPA litgation, News, Policy / Comments are closed

Let There Be No Doubt: We Can Cut Truck Emissions & Fuel Use Today

By / Bio / Published: April 3, 2015

(This post originally appeared on our EDF+Business blog)

The can-do spirit of American automotive engineers has been on full display over the past few weeks, as truck manufacturers unveil innovation after innovation to boost the efficiency of heavy trucks that move companies’ freight cross-country.

It is crystal clear that we possess— today— the know-how to dramatically cut fossil fuel consumption and greenhouse gas emissions from heavy trucks. Moreover, we can do this while saving consumers hundreds of dollars annually and giving trucking companies the high-quality, affordable equipment they require.

DTNA Super Truck HighSome of the recently-announced advances include:

All of these fuel-saving solutions are available today thanks to the acumen of engineers at these leading manufacturers. The first round of well-designed federal fuel efficiency and greenhouse gas standards are also driving innovations like these to the market.

Even so, the strides we are making today should only be the beginning.

Daimler’s Super Truck Doubles Efficiency

The team at Daimler Trucks North America provided the best example yet of our future potential with its entry in the Department of Energy Super Truck program. DTNA announced its team has “achieved 115 percent freight efficiency improvement, surpassing the Department of Energy program’s goal of 50 percent improvement.” Its truck registered 12.2 mpg recently – a leap above the 6 MPG typical of pre-2014 trucks.

Improvements where made across the platform, including electrified auxiliaries, controlled power steering and air systems, active aerodynamics, a long-haul hybrid system, and trailer solar panels. Engine efficiency advancements were particularly noteworthy – given the permanence of such solutions.  The Detroit Diesel engine reported a 50.2 percent engine brake thermal efficiency which was combined with further improvements from engine downspeeding and the use of a waste-heat recovery system.

Daimler’s fantastic results demonstrate that – when given a goal anchored in science, economics and innovation – our engineers can deliver phenomenal results.    Daimler should now lead the way in driving these solutions to national and global scale.

Setting the Bar Higher on Fuel Efficiency and Emissions

The time has come to give our engineers a new goal.

EDF is calling on the Environmental Protection Agency and Department of Transportation to set new fuel efficiency and greenhouse gas standards for heavy trucks that cut fuel consumption by 40 percent in 2025 compared to 2010.  This equates to an average of 10.7 mpg for new tractor-trailer trucks.

President Obama has called for new standards. These are expected to be announced late spring and were sent to the White House Office of Management and Budget for review this past week.

The first generation standards have created a strong, industry-supported foundation on which the coming standards can be built. These standards push improvements in all aspects of trucks through complementary engine and vehicle standards.  In fact, Daimler – a leading manufacturer of heavy trucks with the engineering prowess to set the high bar of 12.2 mpg for the Super Truck program – has recognized these standards as “very good examples of regulations that work well.”

We Have The Technology

Let there be no doubt that if we set a bold goal for 2025 we will meet it:

Setting a bold goal will help us take these technologies from the test track to the highway over the next decade, helping companies reduce both their costs and carbon risks, while delivering benefits for communities’ air quality and the climate.

Posted in Cars and Pollution, Clean Air Act, Greenhouse Gas Emissions, Policy / Comments are closed

Half a Million People across America Support Stronger Protections against Smog Pollution

By / Bio / Published: April 2, 2015

Our friends at Moms Clean Air Force dropping off their smog comments at EPA

The comment period has now closed for the Environmental Protection Agency’s (EPA) proposal to strengthen our national health-based smog standards, and we know one thing already:

Support for cleaning up our air has been tremendous and far-reaching.

More than half a million people from across our nation sent comments urging EPA to strengthen America’s health-based smog protections. And we’re so grateful to our dedicated members and activists for helping EDF collect more than 130,000 of those comments.

EDF strongly supports strengthening our public health standards for ground-level ozone—more commonly known as smog.

Smog contributes to a variety of health problems, including increased risk for asthma attacks, long-term lung damage, other heart and lung diseases, and even premature death. The most susceptible groups are young children and elderly adults.

But it isn’t just EDF – and it isn’t only environmental organizations — calling for cleaner air.

Leading medical associations, states, moms, and environmental justice organizations have highlighted the challenges their constituencies face from this pollution — and have voiced their support for tighter smog protections.

Here are just a few examples:

WE ACT for Environmental Justice said improved smog standards are urgently needed to protect the children in Harlem afflicted by smog pollution:

According to the New York Department of Health and Mental Hygiene, in 2012, children aged 0 to 4 in the Harlem [sic] visited the emergency room 280 times because of asthma. There is no doubt that children in Northern Manhattan are suffering disproportionately from asthma, which is exacerbated by the formation of Ozone and other social stressors.

Mom’s Clean Air Force also weighed in:

Parents have a right to know the truth about whether the air is safe to breathe… Smog standards that reflect current science will protect children from harmful air pollution.

The American Academy of Pediatrics said smog standards must be improved for the sake of children:

Simply put, children are different. They breathe faster. They spend more time outdoors, playing and being physically active. These combined differences mean that, at a given concentration of air pollution, children will be exposed to a higher dose. But their lungs are not fully developed until about 18 years of age. Children are thus at greatest risk from air pollution, because their increased physical activity, plus greater time spent outdoors, means that they are exposed to a higher dose of air pollutants.

In a 2014 joint letter to the White House Office of Management and Budget, Attorneys General  from New York, Maryland, New Hampshire, New Mexico and Rhode Island all expressed support for strengthening our nation’s smog standards, stating that smog pollution has been a persistent problem for their states:

The States [listed above] have been battling ozone pollution (smog) for decades… Although we have made strides to reduce smog levels that harm public health in areas such as New York City and that harm our natural resources in areas such as the Adirondacks, smog remains a persistent threat. Much of this pollution is generated in upwind states and carried by prevailing winds into our States.

Dozens of organizations, including EDF, submitted a letter urging EPA to issue strong standards:

EPA must protect the health of children, people with asthma and other lung diseases, older Americans and other sensitive and vulnerable populations.

The American Lung Association and the March of Dimes wrote an op-ed for CNN that discussed the serious health issues at stake and voiced support for strengthened smog standards:

Over the past several years, a number of studies have indicated a likely link between higher levels of maternal ozone exposure and poor health outcomes in infants, including changes in lung structure and function, low birth weight and neuro-behavioral abnormalities. Many of these health effects can be expected to have lifelong consequences… ​Strengthening the ozone standard to reflect the best current science will help save lives and protect our families, including pregnant women and their babies.

This broad support for stronger smog standards shows how much is at stake for all of us.

Our nation has proven time and again that, by working together, we can achieve pollution reductions in a cost-effective manner. Strengthening these life-saving standards now will help us continue, and build on, progress made in the past that has provided healthier and longer lives for millions of Americans.

Posted in Clean Air Act, Health, Partners for Change, Policy, Smog / Comments are closed