EDF Health

New report: Tackling lead in drinking water at child care facilities

By Lindsay McCormick / Published: June 25, 2018

Lindsay McCormick, Project Manager, Sam Lovell, Project Specialist and Tom Neltner, J.D., Chemicals Policy Director

Recent crises around lead in drinking water have focused national attention on the harmful effects of children’s exposure to lead. While the particular vulnerability of children to lead is well understood by most – what might be surprising is that the majority of child care facilities are not required to test their water for lead.

Only 7 states and one city have such regulations on the books. And while the Environmental Protection Agency (EPA) has provided a voluntary guidance, the “3Ts for Reducing Lead in Drinking Water,” for schools and child care, the document has significant gaps in the child care setting – including an outdated action level of 20ppb and little emphasis on identifying and replacing lead service lines.

Given the critical need for more investigation in this area, we conducted a pilot project to evaluate new approaches to testing and remediating lead in water at child care facilities. EDF collaborated with local partners to conduct lead in water testing and remediation in 11 child care facilities in Illinois, Michigan, Mississippi, and Ohio. We have previously blogged about some early takeaways from testing hot water heaters and our preliminary findings from the project. Today, we released our final report, which provides the full results of the pilot and recommendations to better protect children moving forward.

Read More »

Also posted in Drinking water, Emerging testing methods, Health policy, Health science, Lead, Regulation / Tagged , , , , , | Comments are closed

FDA-approved PFAS and drinking water – Q&A on textile mills and environmental permits

By Tom Neltner, Senior Director, Safer Chemicals Initiative / Published: June 21, 2018

Tom Neltner, J.D., Chemicals Policy Director, and Maricel Maffini, Ph.D., Independent Consultant

In May 2018, we released a blog highlighting paper mills as a potentially significant source of drinking water contamination from 14 Food and Drug Administration (FDA)-approved poly- and per-fluorinated alkyl substances (PFAS) used to greaseproof paper. We showed that wastewater discharge could result in PFAS concentrations in rivers in excess of the Environmental Protection Agency (EPA)’s 70 parts per trillion (ppt) health advisory level for drinking water contamination for PFOA and PFOS, the most studied of the PFASs. We identified 269 paper mills with discharge permits that warrant investigation. Readers of the blog have asked some important questions highlighted below. As with most issues involving PFAS, there are many gaps in what we know. Based on the information provided in response to EDF’s Freedom of Information Act (FOIA) request to FDA, we hope to fill in some of the gaps and highlight key information needed to better understand the risks of PFASs.  

Question 1: Could textile mills also be a source of PFASs in drinking water?

The answer is “probably.” The FDA-approved PFASs can be used in coating paper that contacts food to repel oil, grease, and water. The same or similar FDA-approved PFASs may be used for non-food uses such as coating textiles to resist stains and repel water.

The processes used to coat paper and textiles differ in some aspects that could affect a mill’s environmental releases. For paper, the PFASs are typically added to the wet wood fibers to be made into paper. In contrast, we understand that PFASs are applied to textiles after the water is removed. Therefore, we would suspect that the amount of PFASs, whether as polymers or impurities, released with the wastewater of a textile mill would be lower compared to that of a typical paper mill. However, there is very little data available to assess the potential environmental release of PFASs from textile mills. Unlike with FDA approvals, there is no environmental review of a chemical’s use in non-food consumer products.[1] So, it would be worthwhile to investigate textile mills for use of PFASs in addition to looking at paper mills.

Using an EPA database[2], we identified 66 textile mills (PDF and EXCEL) in the US, two thirds of which are located in North and South Carolina. Based on wastewater flow, the two largest mills are both operated by Milliken. Its largest facility is in Greenville, South Carolina with a water discharge of 72 million gallons per day (MGD). The second largest is in Bacon, Georgia with a water discharge of 15 MGD. DuPont’s Old Hickory facility, near Nashville, Tennessee, had the third greatest flow at 10 MGD. We do not know whether any of the facilities use and discharge FDA-approved PFASs.

Read More »

Also posted in Drinking water, FDA, Food, Health policy, Health science, Regulation / Tagged , , , , , , , , | Authors: / Comments are closed

EPA sets interim limits on hypochlorite bleach to reduce degradation to perchlorate

By Tom Neltner, Senior Director, Safer Chemicals Initiative / Published: May 31, 2018

Tom Neltner, J.D., is Chemicals Policy Director and Maricel Maffini, Ph.D., Consultant

On May 1, 2018, Environmental Protection Agency’s (EPA) Office of Pesticide Programs (OPP) made an interim pesticide registration decision[1] for hypochlorite bleach used to disinfect drinking water. The office decided to require the “Precautionary Statements” section of the bleach’s pesticide label to include advisory best management practices to minimize the formation of chlorate and perchlorate. The new label will state:

“The following practices help to minimize degradant formation in drinking water disinfection:

  • It is recommended to minimize storage time.
  • It is recommended that the pH solution be in the range of 11-13.
  • It is recommended to minimize sunlight exposure by storing in opaque containers and / or in a covered area. Solutions should be stored at lower temperatures. Every 5º C reduction in storage temperature will reduce degradant formation by a factor of two.
  • Dilution significantly reduces degradant formation. For products with higher concentrations, it is recommended to dilute hypochlorite solutions with cool, softened water upon delivery, if practical for the application.”

EDF submitted comments in November 2017 supporting OPP’s proposed label changes and requesting specific changes to the language including making the advice to users mandatory. We also asked the agency to extend the changes to hypochlorite bleach used to treat produce and to disinfect food handling equipment.

Read More »

Also posted in Drinking water, FDA, Food, Health policy, Health science, Perchlorate / Tagged , , , | Comments are closed

EDF and others take FDA to court to demand action on carcinogenic flavors petition

By Tom Neltner, Senior Director, Safer Chemicals Initiative / Published: May 17, 2018

Tom Neltner, J.D., Chemicals Policy Director, and Maricel Maffini, Independent Consultant

FDA’s priority must be resolving safety concerns with
existing chemicals over approval of new ones.

On May 2, EDF and other consumer health advocates filed a lawsuit to force the Food and Drug Administration (FDA) to make a final decision on our food additive petition, which asked the agency to reverse its approvals of seven carcinogenic synthetic flavors. Earthjustice is representing EDF in this petition for a writ of mandamus to the court of appeals. We did not take this action lightly. However, with the statutory deadline for a decision passing more than 20 months ago, we saw little chance that FDA would act without court oversight.

Our food additive petition narrowly focused on one specific issue where the law and science were clear, and laid out our review of both the scientific literature and the law concluding that the seven chemicals were no longer safe. FDA formally accepted the petition for filing – essentially confirming it was complete – which triggered a 180-day deadline under the statute to make a final decision. That deadline passed in August 2016 without a decision by FDA.

Read More »

Also posted in FDA, Food, Health policy, Regulation / Tagged , , | Authors: / Comments are closed

EPA reaffirms Lead-Safe Renovation, Repair, and Painting Rule, citing 150% to 500% payback

By Tom Neltner, Senior Director, Safer Chemicals Initiative / Published: May 10, 2018

Tom Neltner, J.D., is Chemicals Policy Director

In April 2018, the Environmental Protection Agency (EPA) completed a thorough review of its Lead-Safe Renovation, Repair, and Painting Rule (RRP) promulgated a decade ago. This rule requires contractors and landlords to use lead-safe work practices when more than minor amounts of lead-based paint in homes built before 1978 are disturbed. It also applies to pre-1978 child-occupied facilities. This review was conducted pursuant to Section 610 of the Regulatory Flexibility Act because of RRP’s significant impact on more than 300,000 small businesses that perform more than 4 million affected projects each year.

EPA concluded that RRP, including several post-2008 amendments, “should remain unchanged without any actions to amend or rescind it.” As part of the review, the agency updated its economic analysis and found that the estimated annual societal benefits, primarily in improved children’s IQ, of $1.5 to $5 billion exceeds the $1 billion in estimated annual compliance costs. Those estimates translate into an impressive annual payback of 150% to 500%. Keep in mind that these benefits do not include the lower risk of premature cardiovascular deaths attributed to adult lead exposure in a March 2018 report in Lancet.

Read More »

Also posted in Lead, Regulation / Tagged , , , , , | Comments are closed

FDA details its new push on heavy metals in food

By Tom Neltner, Senior Director, Safer Chemicals Initiative / Published: April 25, 2018

Tom Neltner, J.D., Chemicals Policy Director, and Maricel Maffini, Ph.D., Independent Consultant

In May 2017, the US Food and Drug Administration (FDA) Center for Food Safety and Nutrition (CFSAN) announced it had “established a Toxic Elements Working Group whose mission in part is to develop a strategy for prioritizing and modernizing the Center’s activities with respect to food/toxic element combinations using a risk-based approach.” FDA set a goal of limiting lead “to the greatest extent feasible.”

In April 2018, FDA released an interview with the Working Group’s chair, Conrad Choiniere, providing an update on its activities. An overarching point expressed by Choiniere during the interview is that “these metals [lead, arsenic, cadmium and mercury] can have effects on children’s neurological development.” This affirmation of scientific evidence is a welcome sign from the agency. FDA’s key statements are:

  • Initial scope: Children’s exposure to “metals like lead, arsenic, cadmium, and mercury in foods, cosmetics, and dietary supplements.”
  • Approach: “Looking at all the metals across all foods rather than one contaminant, one food at a time.”
  • Initial findings: “Even though the level of a metal in any particular food is low, our overall exposure adds up because many of the foods we eat contain them in small amounts.”
  • Next steps:
    • “Finalizing the draft guidance that sets an action-level for the presence of inorganic arsenic in infant rice cereals and apple juice.”
    • “Begin reevaluating the specific lead levels that FDA has set for a variety of foods.”

Read More »

Also posted in FDA, Food, Lead / Tagged , , , , | Comments are closed