Climate 411

Better Fuel Efficiency for Heavy Duty Trucks — A Target Worth Setting

By Jason Mathers / Published: April 30, 2015
1200px-Kenworth_truck

“Kenworth truck” by Lisa M. Macias, U.S. Air Force via Wikipedia

A pair of critical analyses were just released that, together, make clear the need for a strong second generation heavy truck fuel efficiency and greenhouse gas standard.

The first piece is the U.S. Energy Information Agency’s (EIA) preliminary Annual Energy Outlook for 2015. I went right to the projection of fuel efficiency for new heavy trucks in 2020, which is 7.0 miles per gallon, and compared that to the projection for 2030, which is 7.2 miles per gallon. A three percent increase in efficiency for a decade is not too impressive.

As a result of this lack of projected progress on fuel efficiency and other factors, EIA expects that greenhouse gas emissions from heavy trucks will increase more than any other single end-use source by 2040 – an additional 120 million metric tons a year.

The other recent analysis is from The International Council on Clean Transportation. It released two papers on heavy truck fuel efficiency: one reviewed the potential of current and emerging efficiency technology; the other examined the cost effectiveness of these technologies.

Among the group’s findings are:

  • Already available tractor-trailer technologies can achieve 9 miles per gallon, deliver payback periods of less than a year, and be widely deployed in the 2020 to 2025 time frame.
  • Advanced efficiency technologies, now emerging in the marketplace, can double fuel economy to 11 to 12 miles per gallon, with payback periods of 18 months or less in the 2025 to 2030 time frame.
  • Diverse technology approaches – meaning technology packages with differing contributions from aerodynamic, engine, and other technologies – can achieve similar efficiency results.
  • Even under very conservative assumptions — fuel prices remaining as low as $3.10 per gallon diesel, higher technology costs, and a high discount rate of 10 percent — the most advanced technology packages have payback periods of only 1.4 to 2.2 years.
  • Typical first owners of tractor-trailers with efficiency technology packages up to 9 miles per gallon would see fuel savings 3 to 9 times greater than the upfront technology cost over the period of ownership.

ICCT’s findings demonstrate that we have the technology to cost-effectively cut truck fuel consumption in half compared to 2010 levels. EIA’s projections demonstrate that, without well designed performance-based standards, truck manufacturers are unlikely to deploy these highly cost-effective solutions.

There is good news in EIA’s report, too. The 7.0 miles per gallon in 2020 is up from 6.0 miles per gallon in 2012. The increase can be attributed to the first round of Heavy Truck Fuel Efficiency and Greenhouse Gas Standards set by President Obama in 2011.

We know that well-designed fuel efficiency standards work because we are seeing it in the market today. For the second generation standards that will be announced this spring, we urge the administration to incentivize the full scale deployment of the advanced technologies highlighted in the ICCT analysis.

Posted in Cars and Pollution, Economics, Greenhouse Gas Emissions / Read 1 Response

Let There Be No Doubt: We Can Cut Truck Emissions & Fuel Use Today

By Jason Mathers / Published: April 3, 2015

(This post originally appeared on our EDF+Business blog)

The can-do spirit of American automotive engineers has been on full display over the past few weeks, as truck manufacturers unveil innovation after innovation to boost the efficiency of heavy trucks that move companies’ freight cross-country.

It is crystal clear that we possess— today— the know-how to dramatically cut fossil fuel consumption and greenhouse gas emissions from heavy trucks. Moreover, we can do this while saving consumers hundreds of dollars annually and giving trucking companies the high-quality, affordable equipment they require.

DTNA Super Truck HighSome of the recently-announced advances include:

All of these fuel-saving solutions are available today thanks to the acumen of engineers at these leading manufacturers. The first round of well-designed federal fuel efficiency and greenhouse gas standards are also driving innovations like these to the market.

Even so, the strides we are making today should only be the beginning.

Daimler’s Super Truck Doubles Efficiency

The team at Daimler Trucks North America provided the best example yet of our future potential with its entry in the Department of Energy Super Truck program. DTNA announced its team has “achieved 115 percent freight efficiency improvement, surpassing the Department of Energy program’s goal of 50 percent improvement.” Its truck registered 12.2 mpg recently – a leap above the 6 MPG typical of pre-2014 trucks.

Improvements where made across the platform, including electrified auxiliaries, controlled power steering and air systems, active aerodynamics, a long-haul hybrid system, and trailer solar panels. Engine efficiency advancements were particularly noteworthy – given the permanence of such solutions.  The Detroit Diesel engine reported a 50.2 percent engine brake thermal efficiency which was combined with further improvements from engine downspeeding and the use of a waste-heat recovery system.

Daimler’s fantastic results demonstrate that – when given a goal anchored in science, economics and innovation – our engineers can deliver phenomenal results.    Daimler should now lead the way in driving these solutions to national and global scale.

Setting the Bar Higher on Fuel Efficiency and Emissions

The time has come to give our engineers a new goal.

EDF is calling on the Environmental Protection Agency and Department of Transportation to set new fuel efficiency and greenhouse gas standards for heavy trucks that cut fuel consumption by 40 percent in 2025 compared to 2010.  This equates to an average of 10.7 mpg for new tractor-trailer trucks.

President Obama has called for new standards. These are expected to be announced late spring and were sent to the White House Office of Management and Budget for review this past week.

The first generation standards have created a strong, industry-supported foundation on which the coming standards can be built. These standards push improvements in all aspects of trucks through complementary engine and vehicle standards.  In fact, Daimler – a leading manufacturer of heavy trucks with the engineering prowess to set the high bar of 12.2 mpg for the Super Truck program – has recognized these standards as “very good examples of regulations that work well.”

We Have The Technology

Let there be no doubt that if we set a bold goal for 2025 we will meet it:

Setting a bold goal will help us take these technologies from the test track to the highway over the next decade, helping companies reduce both their costs and carbon risks, while delivering benefits for communities’ air quality and the climate.

Posted in Cars and Pollution, Clean Air Act, Greenhouse Gas Emissions, Policy / Comments are closed

Good News for America: Cleaner, More Efficient Trucks that Protect Our Environment and Strengthen Our Economy

By Jason Mathers / Published: December 1, 2014
Source: Flickr/MoDOT Photos

Source: Flickr/MoDOT Photos

2014 is shaping up to be a great year for truck equipment manufacturers. Sales through October are running 20% higher than their 2013 levels. It’s a banner year that continues to pick-up steam. 2015 is looking even stronger, with forecasts suggesting it will be the 3rd strongest year ever for truck sales. There are several factors driving this market. Higher fuel efficiency is top among them.

This point was brought home recently by the lead transportation analyst for investment firm Stifel, who noted that “the superior fuel efficiency of the newer engines” was a key in getting fleets to buy new trucks now.

The CEO of Daimler Trucks, the leading producer of class 8 trucks for the U.S. market, acknowledged recently that their most efficient engine and transmission combination was “already sold out for 2014” and that the “demand is beyond their expectations.”

It’s not just Daimler that is having a good year.

2014 is a banner year for truck sales; and 2014 trucks are the most efficient ever.  2014 trucks are the most efficient ever because of smart, well-design federal policy.  This is the first year of the 2014-2018 heavy truck efficiency standards that will:

  • reduce CO2 emissions by about 270million metric tons,
  • save about 530 million barrels of oil over the life of vehicles built between 2014 – 2018,
  • provide $49 billion in net program benefits.

The 2014-2018 heavy truck fuel efficiency and greenhouse gas program demonstrates that climate policy benefits businesses, our economy, and human health, while also cutting harmful climate pollution.

Or, as Martin Daum, president and CEO of Daimler Trucks North America noted, these standards “are very good examples of regulations that work well.”

In its first year of existence, the 2014-2018 fuel efficiency and greenhouse gas program is boosting sales for manufacturers, reducing operating costs for fleets, and cutting climate pollution for all of us. It is clear that well-designed federal standards can foster the innovation necessary to bring more efficient and lower emitting trucks to market.   That is very good news, because we have an opportunity to further improve and strengthen these standards – creating more economic and environmental benefits in the process.  For this, we all can be thankful.

This post originally appeared on our EDF + Business blog.

Posted in Cars and Pollution, Greenhouse Gas Emissions, Policy / Read 1 Response

Saving Billions While Cutting Climate Pollution

By Jason Mathers / Published: June 12, 2014

More fuel efficient, lower emission heavy trucks are good for business, good for consumers, and good for combating climate change. By deploying existing and emerging technologies to improve truck efficiency, the U.S. can save billions in fuel expenses while cutting harmful climate pollutions by millions of tons.

EDF is calling on the Obama Administration to set new fuel efficiency and greenhouse gas standards for heavy trucks that cut fuel consumption by 40 percent compared to 2010 levels. These standards would apply for freight trucks and heavy-duty work trucks, such as box delivery trucks, bucket trucks, beverage delivery trucks and refuse trucks.

Analysis by leading environmental and energy efficiency advocates, including EDF, demonstrates that bold heavy truck standards are technically feasible and will be effective in cutting oil consumption and climate pollution.

Strong standards will be good for American business and consumers too.

EDF and Ceres examined how strong standards would affect the cost of moving freight by trucks. The results are unequivocal — strong standards will save companies money.

For example, an owner of a new tractor-trailer unit stands to save between $21,000  and $36,000 during the first year the truck is in service.

By 2030, the combination of both phases of standards will cut fuel use by 1.4 million barrels per day and reduce carbon pollution by 270 million metric tons, compared to the fuel use and emissions that would occur without fuel efficiency improvements.

Companies stand to save nearly $8 billion dollars in 2030 too, as the cost-per-mile to move freight will decrease by $0.07 a mile as a result of the second phase rules alone.

By 2040, these savings could grow to $25 billion annually, as the net effect of the second phase of the standard alone could be to reduce the per-mile cost of moving freight by 21 cents.

Our finding of significant financial benefits of strong fuel efficiency and GHG standards is consistent in magnitude with previous analysis. A recent report by the Consumer Federation of America looked at similar Phase 2 standards and found net savings of $250 to consumers, rising to $400 per household in 2035 as fuel prices and transportation services increase.

With such savings at hand, a natural question is why do we need new standards in the first place? We need new standards because well-designed federal standards foster the innovation necessary to bring more efficient and lower emitting trucks to market.

Strong standards break down barriers that keep technologies from moving from the test track to the assembly line.

Manufacturers need to be confident in market demand in order to develop and launch efficiency improvements. Strong standards give them the certainty they need.

Fleets are often weary of investing in advanced technologies; as such capital investments could put them at a disadvantage if fuel prices drop suddenly, like they did in 2008. For-hire trucking fleets also directly pass on a large percentage of their fuel bill through fuel surcharges to their customers, thus distorting the economic incentive to invest in efficiency.

Manufacturers and fleets can benefit significantly from strong standards. As the EDF analysis demonstrates, manufacturers will have a market for more valuable equipment; while fleets will achieve significant overall savings.

In fact, this is just the type of impact we are seeing from the first phase of heavy trucks standards, which went into effect at the start of this year. Fleets and Manufacturers are praising the rule and new, cost-effect offerings have come onto the market.

Moving forward on strong heavy-truck efficiency and emissions standards is a step that our country needs to take.

Posted in Cars and Pollution, News / Comments are closed

Trucks delivering six miles per gallon won’t work in the long haul

By Jason Mathers / Published: May 8, 2014

Here’s something to think about next time you are stuck in traffic next to an 18-wheeler: The average tractor-trailer can travel only six miles per gallon of diesel.

These heavy trucks travel a lot too; averaging more than 120,000 miles a year or 20 roundtrip drives between Boston and San Francisco. Freight trucks are on the road for one primary purpose: to get goods to all of us. In fact 70% of U.S. freight tonnage is moved by tractor-trailer trucks. Over the coming years, demand for freight services is expected to grow even more. And this is driving up fuel consumption and greenhouse gas emissions.

A call for strong fuel efficiency standards

But it is possible and affordable for tractor-trailer trucks to get nearly 11mpg by 2025. The Obama Administration can set new fuel efficiency and greenhouse gas standards for heavy trucks that cut fuel consumption by 40% compared to 2010 levels. These standards would also apply for heavy-duty work trucks, such as box delivery trucks, bucket trucks, beverage delivery trucks and refuse trucks.

Strong, new fuel efficiency and greenhouse gas standards for our nation’s heavy trucks are achievable, cost-effective and critical to cutting greenhouse emissions and fuel consumption – all while we continue to depend on trucks to deliver the goods we need and want. The slideshow below highlights some of the technology available to meet bold standards as well as the significant cost, oil and emissions savings from such standards.

Bold fuel efficiency standards are good for our economy, environment and energy security. One fact that just jumps out at me is this: These standards will cut our oil consumption by 1.4 million barrels a day. That sounds like a big number and it is. It’s a bit higher than the amount of oil we import daily from Saudi Arabia.

They will also be good for trucking fleets too. These trucks will cost $30,000 less to fuel a year.

Strong fuel efficiency and greenhouse gas standards for heavy trucks are an important part of the President’s Climate Action Plan, and EDF will continue to work towards strong standards through our unique combination of industry engagement, regulatory design expertise and technical know-how.

This post first appeared on our EDF Voices blog

Posted in Cars and Pollution, Economics, Policy / Read 2 Responses

A momentous week for trucks: Walmart unveils “Jetson” truck and President Obama announces next generation fuel efficiency standards

By Jason Mathers / Published: February 19, 2014

(This post originally appeared on EDF + Business)

What a great week it’s been for the future of trucks. Walmart unveiled a prototype, concept next generation tractor-trailer truck that they have affectionately dubbed “Jetson.” This morning, President Obama laid out a timeframe for action on developing the next generation truck efficiency standards – standards that will improve the fuel efficiency of American trucks, bolster energy security, cut carbon pollution, save money and support manufacturing innovation.

Innovation is critical to curb the growing climate pollution and fuel consumption from our nation’s freight trucks – which are projected to increase by 40 percent between now and 2040. But innovation is best supported by strong standards.  A well-designed efficiency program can speed the deployment of clean, energy-efficient technologies and the infrastructure to support their widespread use nationwide.

We have seen the success of this combination many times.  The trucking industry has delivered incredible innovation in meeting stringent standards for particulate matter and oxides of nitrogen, and the first phase of greenhouse gas and fuel efficiency standards. And through their own innovation, manufacturers are meeting these standards in advance of compliance deadlines, doing so for lower costs, and delivering substantial, real-world benefits.

The second phase of fuel efficiency and greenhouse gas standards for trucks and trailers will build on this foundation of success. But they will also build on the innovation of companies like Walmart who are pushing the envelope. 

 The unveiling of Jetson, officially called Walmart Advanced Vehicle Experience (“WAVE”) came during a live webcast of Walmart’s annual Global Sustainability Milestone Meeting on Monday.

At first glance the prototype truck is simply cool looking, and explains why it got the nickname Jetson.  But it is also incredibly fuel-efficient. The tractor is super aerodynamic – in order to achieve the dramatic aerodynamics, the driver sits in the middle of the cab and the engine is under the cab instead of in front of it.  The entire cab lifts up to give access to the powertrain.

The trailer also benefits from advanced aerodynamics. And it is built “almost exclusively from carbon fiber.” Because of this, the trailer weighs 4,000 pounds less than a standard trailer, which would enable it to legally carry more product. The front end is also convex – which enhances the aerodynamics and increases storage capacity.

The power system for the truck is a revolutionary combination of a microturbine; battery storage; electric motor.

While some of the technologies in the Jetson truck may not be street ready in the next few years, Walmart sees value in pushing itself and its vendor partners – Peterbuilt Trucks, Great Dane Trailers and Capstone Turbine – just a little bit farther. And their efforts demonstrate the potential to truly revolutionize our heavy trucks and trailers. Doing this well will require a combination of innovative technology and strong, well designed efficiency standards.

The cleaner freight trucks being made in America today show that when our nation works together we can achieve lasting progress for our economy and our environment – through innovation and common sense policies to advance and secure the transformative cleaner freight trucks of tomorrow.

Posted in News / Read 1 Response