EDF Health

FDA reinstates ban on lead added to hair dyes

Tom Neltner, Chemicals Policy Director

On October 7, FDA announced that it is reinstating its ban on lead acetate as the active ingredient in hair dyes that hide grey hair when used regularly. In 1980, the agency approved the chemical for hair dyes. In response to a color additive petition from the Environmental Defense Fund and others, in October 2018, the agency revoked its approval. Combe Inc, the maker of Grecian Formula, objected and forced the FDA to suspend its decision. With this new action, the FDA reinstates its decision effective January 6, 2022 and gives companies one year to reformulate lead acetate out of their products.

Grecian Formula reportedly stopped using lead acetate shortly before the FDA acted in 2018. From our searches, Youthair is the remaining brand that uses the chemical.

We applaud the FDA’s affirmation of its 2018 decision where it determined these products are not safe. The agency soundly rejects Combe’s arguments that low levels of lead are safe and concludes that “we have determined that there is no known level of exposure to lead that does not produce adverse effects” in adults. These adverse effects include heart and kidney damage.

People should not be spreading lead on their head! It gets through the skin where it can hurt their body in myriad of ways. While we applaud the decision, we don’t see anything in the record that explains why FDA took almost three years to reaffirm the obvious and allow consumers to unknowingly continue using the unsafe product. Therefore, it is even harder to understand why FDA chose to give Youthair another year – until January 2023 – to remove the product from the shelves.

The FDA has known for more than forty years that the lead in these hair dyes is absorbed through the scalp, especially when used every day to hide grey hair, but previously thought there was a safe level. Other federal agencies acknowledged a decade ago there is no known safe amount of exposure to lead in adults or children. The FDA’s action in 2018, reaffirmed today, brings it in line with the scientific consensus.

Beyond lead acetate hair dyes, the FDA needs to do more to drive down consumer’s exposures from all sources of lead in food and cosmetics by tightening limits on this heavy metal in common ingredients. To protect kids and adults, it needs to translate its recognition that there is no known safe level of lead exposure by updating its outdated standards for food additives, bottled water, metal cans, and brass faucets as we demanded in a petition last year. The agency’s Closer to Zero Action Plan for children’s foods is critical but not sufficient to protect adults.

Posted in FDA / Comments are closed

FDA and industry continue to ignore cumulative effects of chemicals in the diet

Tom Neltner, Chemicals Policy Director and Maricel Maffini, consultant

The Food and Drug Administration (FDA) has made no apparent progress to comply with the legal requirement that it consider the cumulative effect of chemicals in the diet that have similar health impacts when evaluating the safety of an additive. A year ago, on September 23, 2020, EDF and 11 other organizations[1] filed a formal petition with the agency documenting the problem and asking it begin complying with the law.

We reviewed FDA and industry actions since the petition was filed and found that both continued to ignore the requirement 100% of the time in:

  • Generally Recognized as Safe (GRAS) notices in which companies were required to consider the cumulative effect as part of their determination that a substance’s use was safe;
  • FDA’s responses to those GRAS notices where it found “no questions” with the flawed safety determinations; and
  • FDA’s revised guidance to industry on use of recycled plastics in food packaging.

The agency’s only response to our petition was a March 2021 letter saying it “has not reached a decision due to competing priorities” and that the “petition is currently under active evaluation by [its] staff.”

From what we can see, FDA and industry continue to make safety determinations about chemical additives without regard to their overall effect on individuals’ health and their legal obligations. Is it any surprise that consumers continue to rate chemicals in food their #1 food safety concern? Read More »

Posted in FDA, Food, GRAS, Health policy, PFAS / Tagged , , | Comments are closed

Lead in hair dye – one company considers it safe

Tom Neltner, J.D.Chemicals Policy Director

In October 2018, the Food and Drug Administration (FDA) banned the use of lead acetate in hair dyes in response to a March 2017 color additive petition from EDF and other health advocates. In December, we learned that Combe, Inc., the maker of the lead-acetate based hair dye Grecian Formula, objected to FDA’s decision, requested a formal evidentiary public hearing to review the decision, and claimed the use is safe. The objection puts the FDA’s decision on hold awaiting a process that may take years to resolve. Apparently, the company thinks it is safe for men to slather skin-soluble lead on their head every couple of days and to risk exposing their families to a heavy metal for which no safe level of exposure has been identified.

Combe’s action was somewhat surprising because the company told CBS News that it removed lead acetate from its Grecian Formula “quite a long time ago,” but was unable to provide an exact date. Presumably, someone in the know updated the product’s Wikipedia page, which says Grecian Formula does not contain lead acetate as of July 2018, although an earlier version of the page said April 2018.

Whatever the date it was reformulated, why would Combe block FDA’s decision when it has long sold a lead-free brand – Just For Men – and had already reportedly removed lead from Grecian Formula? From a market standpoint, objecting to FDA’s decision benefits Youthair, Combe’s main competitor, which continues to sell a leaded-version of progressive hair dye.

Read More »

Posted in FDA, Lead, Public health / Tagged , , | Authors: / Comments are closed

Paper mills as a significant source of PFAS contamination, but who’s watching?

Tom Neltner, J.D., Chemicals Policy Director, and Maricel Maffini, Ph.D., Independent Consultant

Update: See June 21, 2018 Q&A blog on PFAS at textile mills and environmental permits

Across the country, communities are grappling with how to manage contamination of drinking water by perfluorinated alkyl substances (PFASs), a class of chemicals widely used in consumer products, industrial processes, and firefighting foams. Concern over the chemicals grew with the Environmental Protection Agency’s (EPA) 2016 release of a 70 parts per trillion (ppt) drinking water health advisory for PFOA and PFOS, two common and well-studied forms of PFASs.

One challenge to effectively evaluating the potential impacts of PFASs as well as cleaning up priority sites is that there is very little information on where these chemicals are being used. Through a Freedom of Information Act (FOIA) request to FDA, EDF obtained documents previously not made public that show that paper mills using PFASs may be a significant source of contamination to water and potentially to air and compost.

In the nearly 900 documents we received from FDA, we found environmental assessments in four Food Contact Substance Notifications (FCNs) submitted in 2009-2010 by two companies, Daikin America and Chemours.[1] FDA approved each notice, allowing the companies to sell their PFASs to make paper and paperboard repel oil and grease in food packaging such as pizza boxes, sandwich wrappers, and microwave popcorn bags. All four assessments based their estimates on what they called a “typical” paper mill that produces 825 tons of PFAS-coated paper per day and discharges 26 million gallons of water per day.[2]

  • Chemours FCN 885 estimated 95 pounds/day of its PFAS[3] in the wastewater discharge at 43,000 ppt.
  • Chemours FCN 1027 – a notification for the same PFAS – increased the amount in paper from 0.42% to 0.8% resulting in 183 pounds per day in the wastewater discharge at 83,000 ppt.
  • Daikin FCN 933 estimated 180 pounds/day of its PFAS[4] in the wastewater discharge at 83,000 ppt.
  • Daikin FCN 1044 estimated 225 pounds/day of a similar PFAS[5] in the wastewater discharge at 103,000 ppt.

Read More »

Posted in Drinking water, FDA, Health policy, PFAS, Regulation / Tagged , , , , , , , | Authors: / Read 2 Responses