EDF Health

Time for a new age for new chemicals

By Maria Doa, PhD, Senior Director, Chemicals Policy, Samantha Liskow, Senior Counsel, and Colin Parts, Legal Fellow

NOTE: This is the first of a series about EPA’s regulation of new chemicals.

What Happened?

EPA recently proposed regulations to govern how it reviews companies’ pre-manufacture notifications for new chemicals before those chemicals can go on the market.

Why It Matters

Unfortunately, as we noted in our comments to EPA [PDF, 721KB], the proposal falls significantly short of implementing the fundamental changes needed to ensure the safety of any new chemicals allowed onto the market.

Read More »

Also posted in Industry influence, TSCA / Tagged , , , | Authors: / Comments are closed

Now’s the Time—How EPA can use TSCA to turn off the PFAS tap

Faucet with the word PFAS flowing out of it

In the face of mounting evidence about the dangers posed by per- and polyfluoroalkyl substances (PFAS), one thing is clear: EPA needs to take urgent action to turn off the tap of these “forever chemicals” that have long-term consequences for our health and the environment.

As we discussed in a previous blog, it is imperative that the Environmental Protection Agency (EPA) use the Toxic Substances Control Act (TSCA) to regulate PFAS chemicals comprehensively—both those newly entering the market and those that have been in circulation for decades.

Read More »

Also posted in Chemical exposure, Cumulative impact, Cumulative risk assessment, Drinking water, Emerging science, Health policy, Public health, Regulation, Risk assessment, Risk evaluation, TSCA, TSCA reform, Vulnerable populations, Worker safety / Tagged , , , | Authors: / Read 2 Responses

EPA’s approach to 1,4-dioxane falls short of protecting fenceline communities

Clear water pouring from a pitcher into a glass.What’s New?

Recently, the Environmental Protection Agency (EPA) embarked on a critical Toxic Substances Control Act (TSCA) supplemental risk evaluation of 1,4-dioxane [PDF, 8.7MB]– a highly carcinogenic chemical that contaminates drinking water supplies across the country and is present in products, such as cleaning supplies and personal care products.

This draft supplemental risk evaluation represents a significant step forward because it addresses many of the omissions from the original 1,4-dioxane risk evaluation. Unfortunately, as we noted in our comments to EPA, a closer examination reveals several shortcomings in how EPA addresses risks to fenceline communities—people living, playing, and working near industrial facilities that release toxic chemicals into the air and water. Read More »

Also posted in Chemical exposure, Cumulative impact, Cumulative risk assessment, TSCA / Tagged , , | Authors: , / Read 1 Response

New Approach Methodologies Should Adhere to TSCA Standards

What’s New?

EPA recently asked its Board of Scientific Counselors (BOSC), comprised of experts in the fields of toxicology and environmental chemistry, to make recommendations on implementing new approach methods (NAMs) for testing the safety of new chemicals.

NAMs encompass a wide array of new evaluation strategies, including testing cell lines or invertebrates (rather than mammals); using computational approaches; and estimating potential harms of new chemicals by looking at existing toxicity data on similar substances.

Why It Matters

EPA announced in 2019 that it would be redirecting resources towards developing NAMs to replace those studies. The looming concern is the possibility that NAMs may miss effects that whole animal mammalian testing accounts for and generate false negatives — potentially allowing toxic chemicals to appear in consumer products or end up in our environment.

This could happen because relying only on NAMs or using data from one chemical to predict how a new one might behave opens the door to missing negative effects. NAMs could also cause evaluators to miss opportunities to use the Toxic Substances Control Act (TSCA), the nation’s primary chemical safety law, to limit toxic chemical exposures. Read More »

Also posted in Cumulative risk assessment, Emerging science, Emerging testing methods, Frontline communities, Health science, New approach methods (NAMs), Risk assessment, Risk evaluation, TSCA / Tagged , , | Authors: / Comments are closed

Fatally Flawed: EDF & partners call on EPA to revoke approval for new chemicals with shocking health risks

 

 

A sepia-toned image showing a factory with dark smoke billowing out of multiple smokestacks.

What Happened?

EDF and other environmental groups recently asked the Environmental Protection Agency (EPA) to withdraw the approval it issued for a group of new chemicals. This approval, also known as a consent order, allows Chevron to create fuels at its refinery in Pascagoula, Mississippi, by using oils produced through a process of superheating plastic waste to break it down (a process known as pyrolysis). The consent order also allows for the use of these fuels derived from waste plastic at more than 100 locations. ProPublica published an article on the issue on August 4, 2023.

Why It Matters

EPA is required by law to provide protections against unreasonable risks posed by new chemicals. But in the consent order EPA approved the production and use of these new chemicals despite significant health risks. One of the chemicals posed a 1 in 4 risk of developing cancer for people exposed to it. Another chemical carried risks of a 7 in 100 cancer risk from eating fish contaminated by it and a greater than 1.3 in 1 cancer risk from inhaling it.

When asked about the shockingly high cancer risks it estimated, EPA claimed its cancer risk assumptions were overly conservative but failed to provide any information about what it believes are the actual risks and pointed to undefined controls under other laws as controlling the risks.

Until now, the acceptable risk standard for cancer in the general population has been 1 in 1,000,000. The risk levels EPA identified are up to 1,000,000 times greater than that. Read More »

Also posted in Adverse health effects, Chemical exposure, Frontline communities, Health hazards, Health policy, Industry influence, Risk assessment, Risk evaluation, TSCA, Vulnerable populations / Tagged , , , , | Authors: / Comments are closed

EPA Should Use U.S. Chemical Safety Law to Turn Off PFAS Tap

The word

PFAS is a group of synthetic chemicals used in industrial processes and consumer products, including water-repellent clothing, such as outdoor wear, and food packaging. Once these “forever chemicals” are produced and used, they often make their way into the environment and our bodies. Many pose serious threats due to their toxic effects (often at trace levels) and their ability to build up in people, animals and the environment. Studies show that they are in almost all of us.

To make matters worse, people are exposed to multiple PFAS, not individual PFAS in isolation. Yet under the nation’s primary chemical safety law, EPA evaluates the safety of PFAS chemicals one at a time and does not consider the combined risks from exposures to multiple PFAS. Combined exposures increase the risk of harmful effects, thus magnifying the risks and the need for action.

Current Situation: All Costs, No Benefits

PFAS move easily throughout the environment and are difficult to destroy. They have contaminated drinking water, food, farms, wildlife, and the environment more broadly. At the local, state and federal levels, the U.S. is spending millions of dollars to clean up PFAS contamination. Some states, such as Michigan and Maine, are trying to recoup the costs their residents have had to bear to clean-up PFAS contamination of their water and land. The federal government is also taking action to address the widespread PFAS contamination. The costs for cleaning up PFAS contamination are imposed on society by the domestic producers, importers and users of PFAS who profit from their production and use.

Yet, despite the well-documented risks and costs to society of these chemicals, companies still continue to produce, import, and use PFAS. It is time to ban all PFAS or—if there are truly essential uses for these chemicals—limit how they are produced, imported and used so that their impact on us and the environment is minimal.

Urgent Need: Revisit, Reassess, and Regulate All PFAS

While EPA has recently tightened up approvals for new PFAS entering the market, it has yet to take significant action on those that are already on the market, which includes the hundreds of PFAS the agency approved over the past few decades. It is clear these PFAS have not been produced responsibly as demonstrated by the environmental contamination associated with many of the PFAS manufacturing facilities. And yet, many of these PFAS are still on the market. They are being produced and released into the environment, are in products we use every day, and continue to contaminate us and our environment.

Many of EPA’s approvals were made 10 to 20 years ago, before we had a full picture of the pervasiveness and degree of PFAS contamination. The data on the extent of the environmental contamination of these persistent PFAS, their ability to move through the environment, and the significant difficulty in destroying them was not as robust as it is today. Furthermore, mounting evidence shows that even trace levels of PFAS can cause developmental issues in children, reduced fertility, hormonal disruptions, and certain types of cancer.

In addition, these approvals did not consider risks to vulnerable groups, such as pregnant women and children as currently required by the law. Many communities are exposed to multiple PFAS, particularly those who live, work and play near where PFAS are made and used.

Addressing the production, import and use of PFAS would limit further pollution of our water supplies, safeguard the health of our communities, and be consistent with other strong EPA actions to address PFAS, including its recent robust proposed drinking water standards.

Effective regulation of these harmful chemicals at their source would also accelerate efforts to seek out and adopt safer alternatives. Leaving chemicals with such well-documented harms on the market makes it more difficult for innovative, safer substitutes to enter it. Failing to address these risks in effect puts a thumb on the scale in support of older harmful technologies.

Our Take

EPA should re-evaluate each of the PFAS it has approved. During that re-evaluation, EPA should use the best available science and consider the full picture of PFAS exposure. Considering each PFAS in isolation rather than the multiple PFAS people, particularly those in vulnerable groups, are exposed to will underestimate their risk.

EPA should use the Toxic Substances Control Act to take action to ban these legacy PFAS, or restrict them if the uses are truly essential, rather than continuing to allow the production, import and use of these demonstrably harmful “forever chemicals.”

Go Deeper

Learn more about EDF’s concerns about PFAS and read our follow-up blog  on how EPA can use TSCA to turn off the PFAS tap.

EPA’s information on PFAS

Also posted in Chemical exposure, Contamination, Cumulative impact, Cumulative risk assessment, Emerging testing methods, Food, Food packaging, Health hazards, Health science, Public health, Risk assessment, Risk evaluation, TSCA, Vulnerable populations / Tagged , , , , , , , , , , , , | Authors: / Comments are closed